BALE SPEARS & BUSHINGS

Showing 1 - 24 of 28 products

OPERATOR MANUAL CANISTER 12"X3.5" SKU: 023-67670
High Density Polypropylene Resists Weather And Impact Damage, Neoprene Cap Seal Locks Out Water And Dirt, 1/4" Molded Holes For Ease Of Mounting.

$8.27

In stock, 595 units

STABILIZER SPEAR 17"L, 1.25" DIA SKU: 023-85857
Stabilizer bar 17” Long x 1.25” Diameter and 5/16" Pin Hole. Made with C1045 Cold Rolled Steel. Uses 85858 Sleeve.

$22.43

In stock, 63 units

TAPERED BUSHING-HD BALE SPEARS SKU: 023-44132
Used on 44119, 61413, 61414 and 83120 3500# capacity spears. O/A LENGTH (5.71), O/A DIA. (2.36), ID 1.25 x 1.80 (Tapered inside)

$22.56

In stock, 1899 units

BALE SPEAR MOUNTING BRACKET SKU: 023-49669
Bale spear bolt on bracket. Square base. Steel plate with 4 holes, 4" long welded on sleeve, 5/8" u-bolts, 12mm hex bolt, nuts and washers. Fits all cross hole type 42mm spears.

$44.14

In stock, 199 units

SLEEVE FOR 85857 STABILIZER SPEAR SKU: 023-85858
2.875" Long, 1.73" OD, 5/16" pin hole. Fits 85857 spear.

Only 1 unit left

BALE SPEAR PIN-ON 3200# CAP SKU: 023-49667
Your hay hauling equipment becomes useless when it has broken spears. Replace these to keep your machine running with this 47 x 1-5/8 inch bolt-on bale spear that is built to be screwed or welded onto your bale mover. This model is heat treated to resist wear and tear and can hold up to 3, 234 lb. bundles. We also offer its corresponding bushing.

$87.04

In stock, 775 units

BALE SPEAR PIN-ON 32"(42MM) DIAMETER SKU: 023-69122
BALE SPEAR PIN-ON 32 Inch, (27 Inch USABLE) (42MM) DIAMETER, 14MM PIN HOLE, 3234 LBS MAXIMUM LOAD CAPACITY

$144.81

In stock, 12 units

CONE NUT FOR BALE SPEAR M28 SKU: 023-52029
Used on 44119, 61413, 61414 and 83120 spears. Thread size is 28mm and pitch is 1.5mm.

$6.23

In stock, 96 units

BALE SPEAR SKU: 023-33C36WN
Bale spear. 33" crooked tapered neck, 1.41" (36mm) diameter. Comes with nut. Rated at 3,000 lbs on a 30" load center.

$52.59

Sold out

BALE SPEAR PIN-ON WITH MOUNT SKU: 023-49667AB
47" Long x 1-5/8" (42mm) Diameter. Includes Plate with 49668 Sleeve, U-Bolts and Fasteners. 3200# Capacity.

$183.29

In stock, 22 units

BALE SPEAR WITH NUT-1800# CAP SKU: 023-51444
NUT PART# 52028

$40.50

In stock, 544 units

BALE SPEAR WITH NUT-3500# CAP SKU: 023-61413
Broken or worn out bale spears on your hay hauling equipment can be easily replaced to keep your machine running. This 32 inch tapered bale spear comes complete with a nut and can hold up to 3, 500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing.

$81.45

In stock, 95 units

BALE SPEAR WITH NUT-1800# CAP SKU: 023-49664
This hay bale spear is ribbed to provide better grip on your hay bales. The bale spear is 39 inches long and 36 mm at its maximum diameter. Once installed the spear has 34 inches of usable length. The maximum working load is 1, 870 lbs.

$63.51

In stock, 161 units

BALE SPEAR W/NUT-3500# CAP SKU: 023-61414
Worn down and broken spears on your hay equipment are an easy fix to keep your machine running. This 39 inch tapered bale spear comes complete with a nut and can hold up to 3, 500 lbs. It is heat treated to resist wear and tear and we also offer its corresponding bushing.

$90.94

In stock, 608 units

BALE SPEAR WITH NUT-1800# CAP SKU: 023-49665
43" Long x 36mm Diameter. Includes 52028 Nut. Sleeve is 49666.

$70.14

In stock, 207 units

BALE SPEAR WITH NUT-3500# CAP SKU: 023-83120
43" overall length including 2" of thread. Diameter is 45mm, 3500 lbs. cap. The nut is part# 52029.

$110.44

In stock, 116 units

BALE SPEAR W/NUT 49.25"x1.77"-45MM SKU: 023-44119
49-1/4" overall length including 2" of thread. Diameter is 45mm, 3500 lbs. capacity. The nut is part# 52029.

$110.44

In stock, 747 units

BALE SPEAR WITH NUT- 4500# CAP SKU: 023-77880
49-1/4 Inch overall length Diameter is 50mm. 4500 lbs cap. The Bushing is # 77881.

$157.24

Only 1 unit left

BUSHING FOR 38MM SPEARS SKU: 023-52080
O/A LENGTH(4.33 Inch), O/A DIA.(1.77 Inch), ID 1.02 Inch x 1.39 Inch (TAPERED INSIDE)

$19.83

In stock, 101 units

BUSHING FOR 39" & 43" BALE SPEARS SKU: 023-49666
Tapered sleeve for bale spears. Fits all tapered 36mm spears. 5.70" long, 2.01" diameter, 1.05 X 1.44 tapered inside diameter.

$23.34

In stock, 62 units

TAPERED BUSHING-HD BALE SPEARS SKU: 023-77881
Bushing Used on Bale Spear 77880, 4800 lb Capacity. ID is 1.3" Small End, 2" Large End, OD is 2.76", 6.7" Long.

$35.69

In stock, 70 units

SLEEVE FOR PIN-ON BALE SPEAR-4" SKU: 023-49668
Over-All-Length 4 Inches (102 mm), Outside Diameter 2.52 Inches (64 mm), Inside Diameter 1.66 Inches (42mm) with 0.51 Inch (13 mm) Pin Hole Located 1.45 Inches (37 mm) from End. Weight 3.0 lb.

$21.91

In stock, 725 units