LIFT ARM AND STABILIZER
LIFT ARM AND STABILIZER
94 products
Showing 1 - 24 of 94 products
Display
View

LIFT ARM BUSHING CATEGORY 3-4
SKU: 873-34375
1-1/2 Inch ID X 2 Inch OD X 3-3/4 Inch Long Lift Arm Reducing Bushing - Zinc plated
Sold out
1-1/2 Inch ID X 2 Inch OD X 3-3/4 Inch Long Lift Arm Reducing Bushing - Zinc plated
Sale price$7.18

STABILIZER PIN
SKU: C5NNN873A
Stabilizer bracket pin. 3-3/8" overall length, 7/8" diameter, 1/2" useable shaft, 5/8" NC, 1-7/8" thread length.
In stock, 272 units
Stabilizer bracket pin. 3-3/8" overall length, 7/8" diameter, 1/2" useable shaft, 5/8" NC, 1-7/8" thread length.
Sale price$8.80

CATEGORY 1 BALL SOCKET
SKU: 873-221
Lift Arm Ball Socket, Cat 1, Standard Duty, 7/8" ID, 1-3/8" bore length, 7/8" sleeve width, 2-3/8" OD
In stock, 99 units
Lift Arm Ball Socket, Cat 1, Standard Duty, 7/8" ID, 1-3/8" bore length, 7/8" sleeve width, 2-3/8" OD
Sale price$15.42

CAT 2 BALL AND SOCKET WELD-ON - 1 INCH BORE
SKU: BJ5526
Lift arm ball joint, weld-on, 1" bore. Pack qty 2.
In stock, 160 units
Lift arm ball joint, weld-on, 1" bore. Pack qty 2.
Sale price$31.81
No reviews

CAT 2 BALL AND SOCKET WELD-ON - 1-1/8 INCH BORE
SKU: BJ5496
Lift arm ball joint, weld-on, 1-1/8" bore. Pack qty 1.
In stock, 65 units
Lift arm ball joint, weld-on, 1-1/8" bore. Pack qty 1.
Sale price$29.82

SLEEVE BUSHING - CATEGORY 1
SKU: 873-351
7/8 Inch ID X 1-1/8 Inch OD X 1-3/4 Inch long. Fits all Category 1 Draw Pins - Zinc plated
In stock, 5360 units
7/8 Inch ID X 1-1/8 Inch OD X 1-3/4 Inch long. Fits all Category 1 Draw Pins - Zinc plated
Sale price$1.99

LIFT ARM BUSHING WITH HOLE CAT 2-3
SKU: 873-3010
Has hole for 7/16" Lynch Pin
In stock, 585 units
Has hole for 7/16" Lynch Pin
Sale price$3.13

LIFT ARM WELD-ON END CATEGORY 2
SKU: 873-1342
1-1/8" ID x 1-3/4" ball thickness
In stock, 69 units
1-1/8" ID x 1-3/4" ball thickness
Sale price$28.90

CATEGORY 2 BALL SOCKET
SKU: 873-2216
Lift Arm Ball Socket, Cat 2, Heavy Duty Duty, 1-1/8" ID, 1-3/8" bore length, 1-3/8" sleeve width, 3-1/8" OD, Zinc Plated finish.
Sold out
Lift Arm Ball Socket, Cat 2, Heavy Duty Duty, 1-1/8" ID, 1-3/8" bore length, 1-3/8" sleeve width, 3-1/8" OD, Zinc Plated finish.
Sale price$36.30

MOWER DECK STABILIZER KIT. CONTAINS 2 BRACKETS AND 2 CHAINS
SKU: 873-159335
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
In stock, 68 units
Stabilizer Kit for Mower Deck. Has 1/4" proof coil chain, 1175# Working load limit, 1/4" thick plates. Contains two brackets and two chains with smaller brackets.
Sale price$50.75

LEFT HAND TONG ASSEMBLY
SKU: FH1447
Left Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14411.
In stock, 9 units
Left Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14411.
Sale price$371.05

RH TONG
SKU: FH1448
Right Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14412.
Only 1 unit left
Right Hand Tong Assembly. Combination ball socket for category I and II. Overall length 27-7/8", 26" pin spacing. Replaces FH14412.
Sale price$371.05

TONG ARM
SKU: FH14416
Left hand formed tong assembly with combination ball socket. For speedy conversion to category I or II ball, 32" pin spacing.
Only 1 unit left
Left hand formed tong assembly with combination ball socket. For speedy conversion to category I or II ball, 32" pin spacing.
Sale price$391.96

RIGHT HAND TONG ASSEMBLY
SKU: FH14417
Right Hand Tong Assembly. Formed tong combination ball socket. For speedy conversion to Category I or II ball, 32" pin spacing.
In stock, 6 units
Right Hand Tong Assembly. Formed tong combination ball socket. For speedy conversion to Category I or II ball, 32" pin spacing.
Sale price$391.96

BALL SOCKET
SKU: SBJ1
Top Link Ball Socket, Cat 1&2, Standard Duty, 3/4"&1" ID, 1-1/2"&1-1/4" bore length, 7/8" sleeve width, 2-3/8" OD, Black Oxide finish.Weld-on combination ball joint. For 3/4" or 1" pins. Category I or II.
Sold out
Top Link Ball Socket, Cat 1&2, Standard Duty, 3/4"&1" ID, 1-1/2"&1-1/4" bore length, 7/8" sleeve width, 2-3/8" OD, Black Oxide finish.Weld-on combination ball joint. For 3/4" or 1" pins. Category I or II.
Sale price$29.52
No reviews

32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - RED
SKU: JSA1002R
Category 1 accommodates 7/8" drawbar or lower link pins.Replacement for Ford 9N555B right or left.For black version, order 873-LA335HT
Only 4 units left
Category 1 accommodates 7/8" drawbar or lower link pins.Replacement for Ford 9N555B right or left.For black version, order 873-LA335HT
Sale price$79.91

LIFT ARM
SKU: D0NN555DRH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555CLH.
In stock, 75 units
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555CLH.
Sale price$111.68

LIFT ARM
SKU: D0NN555CLH
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555DRH.
In stock, 40 units
Lower lift arm, LH, 5160 steel. 32" hole centers. Same application as D0NN555DRH.
Sale price$108.39

32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - BLUE
SKU: JSA1002B
Category I accommodates 7/8" drawbar or lower link pins.For black version, order 873-LA335HT
In stock, 79 units
Category I accommodates 7/8" drawbar or lower link pins.For black version, order 873-LA335HT
Sale price$79.91
No reviews

32 INCH CAT 1 LOWER LIFT ARM WITH FORGED BALL JOINT ENDS - BLACK
SKU: 873-LA335HT
Category I accommodates 7/8" drawbar or lower link pins.Center section is heat treated.
In stock, 634 units
Category I accommodates 7/8" drawbar or lower link pins.Center section is heat treated.
Sale price$65.22

STABILIZER KIT RED
SKU: SK100
Stabilizer kit for Category I 3 point hitch, 31-1/2" hole spacing. Contains 2 arms, 2 brackets, 2 stabilizer pins with nut and lock washer, 2 linch pins with chains.
In stock, 113 units
Stabilizer kit for Category I 3 point hitch, 31-1/2" hole spacing. Contains 2 arms, 2 brackets, 2 stabilizer pins with nut and lock washer, 2 linch pins with chains.
Sale price$66.13
No reviews
Filters (0)
Main menu