SPROCKETS & PULLEYS

Showing 1 - 24 of 158 products

50-17 TOOTH 5/8"ID IDLER SPROCKET SKU: 673-S80551700
Roller Chain Idler Sprocket with 17 teeth

$23.33

Baler Upper Drive Sprocket - 1-1/2 Hex SKU: 520-39654
Upper Drive Roller Sprocket. Use on Round Balers 330, 335, 375, 430, 530, 435, 535, 466, 566, 446, 546, 456, 556, 467, 567, 457, 557, 447, 547, 448, 458, 558.

$76.64

In stock, 8 units

50-48 TOOTH SPROCKET SKU: WSS105048
Number of Teeth 48, Series of Hub Used X.

$63.46

Sold out

RC TIGHTENER SKU: 2755CB2
60 PITCH AND SMALLER ROLLER CHAIN SIZE, 3/8,1/2,5/8, BOLT HOLE MOUNTING SIZE. 1 WIDTH, 2-3/4 OD, 1/8 BOTH SIDES D.

$38.20

In stock, 7 units

60-32 TOOTH SPROCKET SKU: 673-S80603200
This Tooth Sprocket is Identified As #60 Chain Weld Sprocket with 32 Teeth.

$46.97

Only 5 units left

80-13 TOOTH SPROCKET SKU: 971-20008013
#80 Chain Weld Sprocket with 13 teeth.

$22.56

Only 2 units left

IDLER SPRKT KIT SKU: S271
Kit, idler sprocket and bushing: 17 tooth sprocket with 1/2" and 3/8" bore using #50 or #2050 chain, plus adapter bushing for 1/2" to 3/8" bore. Converts & replaces wooden idler block 11000271 on Gleaner combines.

$22.02

Sold out

SPROCKET FOR CORNHEAD-RELUBE SKU: 864-SMA101219
Cornhead Lower Idler Sprocket with .646" round bore for 40 series S/N 466451 and up - Replaces John Deere - AH101219 (Relube).

$21.33

In stock, 36 units

BELT IDLER SKU: TP-AP24354
NEW HOLLAND: Idler pulley, 7 inch O.D., 5/8 inch bore, 1 inch inner rim width. Auger clutch belt idler on combines: TR70, TR75, TR76, TR85, TR86, TR95. JOHN DEERE: Idler pulley, 7 inch outside diameter., 5/8 inch bore, 1 inch inner rim width. Reel drive idler on round Balers: 330, 335, 375, 385, 430, 435, 530, 535; Combines: upper & lower feed roll drive on model 45; reel drive, grain auger, elevator lower drive on model 55; various locations including reel drive, loading auger, tailings auger, straw chopper reverse drive on models: 95, 105; feeder conveyor on 6602. reel drive idler on Mower Conditioners: 480, 483, 485, 1207, 1209, 1214, 1217, 1219, 1380, 1480; knife drive idler on 1214, 1380, 1480; reel & knife idler on Windrower auger platform: 183; knife drive on platform: 220, 230, 240; reel drive idler on Draper Platform: 78, 130, 135. Replaces AE24144.

$59.98

Only 3 units left

BALER STARTER ROLLER DRIVE SPROCKET SKU: 520-54301
Starter Roller Sprocket. Used on Round Balers 466, 566, 446, 546, 456, 556, 467, 567, 457, 557, 447, 547, 448, 458, 558.

$58.44

Only 2 units left

Baler Drive Sprcket - Upper Idler 1-1/4 SKU: 520-74597
#80 x 13 tooth, 1-1/4"hex bore. Will replace JD AE74597.

$71.44

In stock, 8 units

BALER DRIVE SPROCKET 1-1/4" HEX BORE SKU: 520-39301
Main Drive Sprocket from Gear Box. Use on Round Balers 330, 335, 375, 430, 530, 435, 535, 466, 566, 446, 546, 456, 556, 467, 567, 457, 557, 447, 547, 448, 458, 558.

$64.94

Only 5 units left

Baler Pickup Drive Sprocket - 1-1/4 Hex SKU: 520-58632
Drive Sprocket for Standard Pickup. Used on Round Balers 467, 567, 457, 557, 447, 547, 448, 458, 458 silage, 558, 468, 468s, 568. Replaces AE58632 and AFH205822.

$58.44

In stock, 10 units

Baler Drive Sprocket - Upper Drive 1-1/2 SKU: 520-74596
#80 x 30 tooth, 1-1/2" hex bore. Will replace JD AE74596.

$103.94

Only 2 units left

Baler Drive Sprocket-Lower Drive 1-1/2 SKU: 520-39652
Lower Drive Roller Sprocket. Use on Round Balers 330, 335, 375, 385, 435, 535.

$116.94

Only 1 unit left

Lower Roller Drive Sprocket - 1-1/2" Hex SKU: 520-54302
Lower Drive Roller Sprocket. Used on Round Balers 466, 566, 446, 546, 456, 556, 467, 567, 457, 557, 447, 547, 448, 458, 558.

$129.94

Only 4 units left

Baler Drive Sprocket - Upper Idler 1-1/2 SKU: 520-74598
#80 x 30 tooth and #60 x 24 tooth, 1-1/2" hex bore. Will replace JD AE74598.

$136.44

Only 2 units left

SPROCKET IDLER KIT SKU: S256
Kit, idler sprocket and bushing: 15 tooth sprocket with 5/8" and 1/2" bore using #60 or #2060 chain, plus adapter bushing for 5/8" to 1/2" bore. Converts & replaces wooden idler block 1116256 on Gleaner combines.

$41.86

In stock, 15 units

IDLER SPROCKET SKU: AG2417

$35.34

In stock, 64 units

SPLIT SPROCKET SKU: H5508B6
JOHN DEERE: Split sprocket, 8 teeth, 1-1/4 inch round bore. For clean grain elevator chain. Upper and/or lower sprocket, check shaft diameter before ordering. Can replace original one piece chain sprocket H91334. Combines: 6600, 6601, 6602, 6620, 6622, 7700, 7701, 7720, 7721, 8820. ACCESSORIES AND SUPPLIES: TOOTH COUNT 8, ROUND BORE 1-1/4 inch, CHAIN TYPE CA550, OEM JD, CLEAN GRAIN ELEVATOR

$90.94