Banjo
2' POLY W/6.5 HP PRO BRIGGS
SKU: 909-200P6PROBUNA
Banjo 200P6PRO 2 inch Polypropylene Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Precision molded construction, lightweight, corrosion resistant, superior design, low maintenance. EPDM elastomers standard, FKM (Viton type) available. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
In stock, 40 units
Banjo 200P6PRO 2 inch Polypropylene Self-Priming Pump with 6.5 HP Briggs & Stratton Engine Pro Series. Pump Features: Precision molded construction, lightweight, corrosion resistant, superior design, low maintenance. EPDM elastomers standard, FKM (Viton type) available. Motor Features: Cast iron cylinder sleeve, Heavy duty flywheel, Overhead valve, High oil fill Oil Guard and low oil sensor, Breather through air cleaner. CAUTION-WARNING: Please do not run pump dry, restrict or reduce port sizes, or dead head pump. This could cause component failure to pump. DO NOT USE WITH FLAMMABLE LIQUIDS.
Sale price$739.61
Banjo
BANJO PUMP REPAIR KIT BUNA(NEW STYLE PUM
SKU: 909-12000ABN
New Style Pump Kit for 1996 & newer pumps. Includes 12754BN O-Ring Segment, 12719ABN Body-O-Ring, 12774VA Impeller Bolt Gasket, 12705BN Buna Check Valve, UV15163 Prime/Drain Plug O-Ring, 12713BN Buna Pump Seal, and 12710 Seal O-Ring.
Only 2 units left
New Style Pump Kit for 1996 & newer pumps. Includes 12754BN O-Ring Segment, 12719ABN Body-O-Ring, 12774VA Impeller Bolt Gasket, 12705BN Buna Check Valve, UV15163 Prime/Drain Plug O-Ring, 12713BN Buna Pump Seal, and 12710 Seal O-Ring.
Sale price$93.20
Banjo
5 VANE IMPELLER FOR 5 HP(NEW STYLE PUMP)
SKU: 909-12772
5 Vane Impeller - 5 HP for New Style Banjo Pump
Only 4 units left
5 Vane Impeller - 5 HP for New Style Banjo Pump
Sale price$49.19
Banjo
POLY PUMP VOLUTE(NEW STYLE BANJO PUMP)
SKU: 909-12702A
Volute for New Style Banjo Pump
Only 4 units left
Volute for New Style Banjo Pump
Sale price$79.18
Banjo
PUMP PRIME/DRAIN PLUG(NEW STYLE BANJO PU
SKU: 909-12777
Prime/Drain Plug for New Style Banjo Pump
In stock, 33 units
Prime/Drain Plug for New Style Banjo Pump
Sale price$3.48
Banjo
BANJO CHECK VALVE BUNA
SKU: 909-12705BN
Buna Check Valve for New and Old Style Banjo Pump
Only 5 units left
Buna Check Valve for New and Old Style Banjo Pump
Sale price$19
Banjo
BANJO PUMP BODY O RING BUNA (NEW STYLE)
SKU: 909-12719ABN
Body Buna O-Ring for New Style Pump
In stock, 25 units
Body Buna O-Ring for New Style Pump
Sale price$16.79
Banjo
REPAIR KIT FOR BANJO 222 SERIES PUMP
SKU: 909-15000
FKM (Viton type) Pump Repair Kit (Items 5, 8, 11-12, 18-20, 12099, 15751 and 15752). Repair Kit Includes: (2) 13778 O-Ring, (1) 12774VA Impeller Bolt Gasket, (1) 12719A Body O-Ring, (1) 12710 O-Ring, (4) 12717 O-Ring, (1) 12713V FKM (viton type) Seal Assembly w/316 SS Cup and Spring, (1) 12099 7/16 inch-14 x 1.25 inch HHCS, (1) 15751 Bracket Shim, (1) 15752 Impeller Shim.
In stock, 6 units
FKM (Viton type) Pump Repair Kit (Items 5, 8, 11-12, 18-20, 12099, 15751 and 15752). Repair Kit Includes: (2) 13778 O-Ring, (1) 12774VA Impeller Bolt Gasket, (1) 12719A Body O-Ring, (1) 12710 O-Ring, (4) 12717 O-Ring, (1) 12713V FKM (viton type) Seal Assembly w/316 SS Cup and Spring, (1) 12099 7/16 inch-14 x 1.25 inch HHCS, (1) 15751 Bracket Shim, (1) 15752 Impeller Shim.
Sale price$171.90
Banjo
3 VANE IMPELLER FOR 3.5 HP(NEW STYLE BAN
SKU: 909-12771A
Banjo 12771A 3 Vane Impeller -Replacement Parts
Only 2 units left
Banjo 12771A 3 Vane Impeller -Replacement Parts
Sale price$49.19
Banjo
BANJO 2" PUMP BODY(NEW STYLE PUMP)
SKU: 909-12712A
2" Pump Body for New Style Banjo Pump
Sold out
2" Pump Body for New Style Banjo Pump
Sale price$162.18
Banjo
EPDM GASKET BANJO PUMP
SKU: 909-17013
EPDM Gasket for 2" Gas Driven Self-Priming Centrifugal Pump
In stock, 12 units
EPDM Gasket for 2" Gas Driven Self-Priming Centrifugal Pump
Sale price$8.55
Banjo
BANJO PUMP BODY O RING EPDM (NEW STYLE)
SKU: 909-12719A
2-375 Body O-Ring
In stock, 17 units
2-375 Body O-Ring
Sale price$16.79
QD PUMP COUPLER 540/1000-FORGED
SKU: 706-90100
15/16" shaft, 1 3/8", 540 & 1000 RPM (Combined)
Only 1 unit left
15/16" shaft, 1 3/8", 540 & 1000 RPM (Combined)
Sale price$88.28
DELAVAN PUMP QUICK COUPLER
SKU: 706-468143
Has 15/16" ID, for 540 and 1000 rpm
In stock, 13 units
Has 15/16" ID, for 540 and 1000 rpm
Sale price$34.10
DELAVAN PUMP QUICK COUPLER
SKU: 706-468141
Has 5/8" ID, for 540 and 1000 rpm
In stock, 75 units
Has 5/8" ID, for 540 and 1000 rpm
Sale price$32.55
Banjo
2" MPTX2" BARB SHANK BANJO BLACK POLY
SKU: 909-HB200
This Banjo HB200-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 2 inch barbed connection on one end and a 2 inch male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection at a 90-degree angle to change the direction of flow. This schedule 80 elbow is made of glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to high impact, heat, corrosion, and most chemicals. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper (NPT) threaded end connects with a female NPT threaded connection. The integral nut assists with tightening the fitting. The maximum working pressure for this fitting is 150 pounds per square inch PSI at 70 degrees F. This barbed hose elbow is suitable for use in agricultural and industrial systems for liquid flow applications.
In stock, 546 units
This Banjo HB200-90 barbed hose 90-degree elbow is made of glass-reinforced polypropylene and has a 2 inch barbed connection on one end and a 2 inch male NPT threaded connection on the other to connect a tube or a hose to a female NPT threaded connection at a 90-degree angle to change the direction of flow. This schedule 80 elbow is made of glass-reinforced polypropylene for rigidity, lightweight, dimensional stability, and resistance to high impact, heat, corrosion, and most chemicals. The barbed connection creates a tight seal on a tube or hose, and the male National Pipe Taper (NPT) threaded end connects with a female NPT threaded connection. The integral nut assists with tightening the fitting. The maximum working pressure for this fitting is 150 pounds per square inch PSI at 70 degrees F. This barbed hose elbow is suitable for use in agricultural and industrial systems for liquid flow applications.
Sale price$4.70
Hypro
HYPRO FORGED PUMP COUPLER
SKU: 449-13200076
Forged Steel Roller Pump Coupler - Set Screw Type - 15/16" shaft, 1 3/8", 6 spline
In stock, 15 units
Forged Steel Roller Pump Coupler - Set Screw Type - 15/16" shaft, 1 3/8", 6 spline
Sale price$73.22
Ace
BAC7V--ACE PUMP VITON SHAFT SEAL
SKU: 014-40151
Viton Mechanical Seal - Includes 40160 O-Ring - Used on Series FMC, FMCHYD, and PTOC Pumps.
In stock, 85 units
Viton Mechanical Seal - Includes 40160 O-Ring - Used on Series FMC, FMCHYD, and PTOC Pumps.
Sale price$52.84
Hypro
KIT W/SUPER ROLLERS-6500
SKU: 449-34300380
Parts Kit for 6500 - Includes 6 Super Rollers, Seals, O-Ring
In stock, 22 units
Parts Kit for 6500 - Includes 6 Super Rollers, Seals, O-Ring
Sale price$60.15
Hypro
MOTOR & BY-PASS KIT-9303
SKU: 449-34300748
Hydraulic Motor and Bypass Kit - 9300 3430-0178 has been superseded by 3430-0748 kit includes: Seal , ball bearing, port adpt O-rings for the motor
In stock, 18 units
Hydraulic Motor and Bypass Kit - 9300 3430-0178 has been superseded by 3430-0748 kit includes: Seal , ball bearing, port adpt O-rings for the motor
Sale price$119.94
Hypro
KIT W/SUPER ROLLERS-7560
SKU: 449-34300381
Parts Kit for 7560, 7700 - Includes 8 Super Rollers, Seals, O-Ring
In stock, 22 units
Parts Kit for 7560, 7700 - Includes 8 Super Rollers, Seals, O-Ring
Sale price$85.99
Hypro
HYPRO CI PEDESTAL PUMP
SKU: 449-9203C
Cast Iron Pedestal Mount Centrifugal Pump - 90 GPM @ 3600 RPM-40 PSI
Sold out
Cast Iron Pedestal Mount Centrifugal Pump - 90 GPM @ 3600 RPM-40 PSI
Sale price$766.13
Hypro
8 ROLLER HYPRO PUMP
SKU: 449-7560C
The HYPRO7560C roller water pump can hold up to harsh chemicals with its cast iron body and housing. It has 8 rollers in this hydraulic pump, and it is designed for agricultural, farming, residential, and commercial applications. This powerful self-priming pump handles up to 300 PSI. It has a maximum flow rate of 22.5 GPM, and it is great for all of your water pump needs.
In stock, 39 units
The HYPRO7560C roller water pump can hold up to harsh chemicals with its cast iron body and housing. It has 8 rollers in this hydraulic pump, and it is designed for agricultural, farming, residential, and commercial applications. This powerful self-priming pump handles up to 300 PSI. It has a maximum flow rate of 22.5 GPM, and it is great for all of your water pump needs.
Sale price$404.77