7 INCH AGRITUF AGGRESSIVE RIPPER POINT FOR CASE IH 1-1/4 INCH SHANK
SKU: ATSRC7A-114
Replaces 47465172
In stock, 846 units
Replaces 47465172
Sale price$139.20
8 INCH AGRITUF NO-TILL POINT FOR CASE IH ECOLO TIGER INLINE RIPPER
SKU: ATSRC8NT-34
Replaces 87388006 and Nichols RPDM158FCP.Use bolt kit AT425108
In stock, 63 units
Replaces 87388006 and Nichols RPDM158FCP.Use bolt kit AT425108
Sale price$172.41
AGRITUF CHROME SHANK GUARD FOR CASE IH ECOLOTIGER
SKU: ATSRPC
Shank wear guard for Case IH EcoloTiger 870 and 875 with 1-1/4” shank.Attaches with two 3/8" x 2" roll pins (Item: 444-RP38X2)
In stock, 759 units
Shank wear guard for Case IH EcoloTiger 870 and 875 with 1-1/4” shank.Attaches with two 3/8" x 2" roll pins (Item: 444-RP38X2)
Sale price$92.29
10 INCH AGRITUF SUPERRIP POINT FOR DEERE, KUHN-KRAUSE, LANDOLL, WILRICH WITH 1-1/4 INCH SHANK
SKU: ATSRD10-114
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
In stock, 263 units
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
Sale price$214.02
2-1/2 INCH AGRITUF SUPERRIP POINT FOR DEERE, KUHN-KRAUSE, LANDOLL, WILRICH WITH 1-1/4 INCH SHANK
SKU: ATSRD212-114
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
In stock, 64 units
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
Sale price$143.51
5 INCH AGRITUF SUPERRIP POINT FOR DEERE, KUHN-KRAUSE, LANDOLL, WILRICH WITH 1-1/4 INCH SHANK
SKU: ATSRD5-114
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
In stock, 223 units
Fits John Deere LaserRip / Wil-Rich / Kuhn-Krause / Landoll
Sale price$170.78
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412013JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Only 4 units left
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 x 13. Uses 1/2" plow bolt.
Sale price$32.57
SUBSOILER POINT CAPPED FOR JD
SKU: 972-412013JDC
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sold out
Subsoiler Point produced from high carbon steel and heat-treated. With high chrome cap installed. High chrome will outwear plain by up to 10 times. Made in the USA Bolt-on - 1 x 2 x 13 - Capped
Sale price$58.94
SUBSOILER POINT FOR JOHN DEERE
SKU: 972-412512JD
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
In stock, 6 units
Subsoiler Point produced from high carbon steel and heat-treated. Made in the USA Bolt-on - 1 x 2 1/2 x 12
Sale price$37.79
WEAR SHIN FOR KMC
SKU: 972-KMC100
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Sold out
Will replace KMC 17-057-004. 5/16 inch x 1-3/8 inch spirol pin (3) required KMC 17-050-022
Sale price$16.09
3/8 X 2 INCH ROLL PIN
SKU: 444-RP38X2
Used on 41B2512JD and other ripper points.
In stock, 677 units
Used on 41B2512JD and other ripper points.
Sale price$0.83
SUBSOILER POINT 1-1/4"X1-3/4"X11" BOOTED KMC
SKU: 972-15483
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sold out
1-3/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 1-1/16" for 1" wide shank. Will replace KMC 16-080-096.
Sale price$34.89
SUBSOILER POINT BOOTED KMC
SKU: 972-34800
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
In stock, 46 units
1-1/4" wide x 1-1/4" thick x 11" long. Inside width of boot is 13/16" for 3/4" wide shank. Will replace KMC 16-080-075
Sale price$28.47
AGRITUF WEAR SHIN FOR KMC AND UNVERFERTH 3/4 INCH SHANK
SKU: ATRSSU
In stock, 292 units
Sale price$42.28
11 INCH RIPPER POINT FOR UNVERFERTH
SKU: 972-U64322B
Cast Ripper Point for Unverferth Rip Strip. Fits shank tip #65117
In stock, 263 units
Cast Ripper Point for Unverferth Rip Strip. Fits shank tip #65117
Sale price$36.76
TYE/BIGHAM PARA-TILL RIPPER POINT
SKU: 918-TF123
Cast Steel With Chrome. Replaces 550-148, 681-002.
Sold out
Cast Steel With Chrome. Replaces 550-148, 681-002.
Sale price$41.98
8MM X 60MM ROLL PIN - FOR TF123 POINT
SKU: 444-RP860
8MM dia X 60MM length.( longer length available -part # SPM080070 8MM x 70 MM)
In stock, 428 units
8MM dia X 60MM length.( longer length available -part # SPM080070 8MM x 70 MM)
Sale price$0.98
CHROMIUM CARBIDE INSTEP LH
SKU: 693-003L
Chromium Carbide Instep for Parabolic Subsoiler.
In stock, 102 units
Chromium Carbide Instep for Parabolic Subsoiler.
Sale price$46.81
CHROMIUM CARBIDE INSTEP RIGHT HAND
SKU: 693-003R
Chromium Carbide Instep for Parabolic Subsoiler.
Sold out
Chromium Carbide Instep for Parabolic Subsoiler.
Sale price$46.81
CHROMIUM CARBIDE UPPER SHIN LH
SKU: 693-004L
Chromium Carbide Upper Shin for Parabolic Subsoiler
In stock, 71 units
Chromium Carbide Upper Shin for Parabolic Subsoiler
Sale price$179.28
CHROMIUM CARBIDE UPPER SHIN RIGHT HAND
SKU: 693-004R
Chromium Carbide Upper Shin for Parabolic Subsoiler
In stock, 59 units
Chromium Carbide Upper Shin for Parabolic Subsoiler
Sale price$178.83
CHROMIUM CARBIDE LOWER SHIN LH
SKU: 693-005L
Chromium Carbide Lower Shin for Parabolic Subsoiler
In stock, 68 units
Chromium Carbide Lower Shin for Parabolic Subsoiler
Sale price$82.37
CHROMIUM CARBIDE LOWER SHIN RIGHT HAND
SKU: 693-005R
Chromium Carbide Lower Shin for Parabolic Subsoiler
In stock, 61 units
Chromium Carbide Lower Shin for Parabolic Subsoiler
Sale price$82.37
SHEAR BOLT FOR PARATILL
SKU: 693-TY1512
Shear bolt for ParaTill. Measures 1-1/8 inch X 5-1/2 inch . Will replace 6101822. Uses 693-TY1512N lock nut.
In stock, 148 units
Shear bolt for ParaTill. Measures 1-1/8 inch X 5-1/2 inch . Will replace 6101822. Uses 693-TY1512N lock nut.
Sale price$30.11